Table of Contents
Advertisement
Pin configuration
Terminal explanations
Terminal No.
Terminal name
CIRCUIT DESCRIPTION
Note) I: Input terminal (Ip incorporates a pull-up resistor.)
O
: Output terminal
Function
1
XT
Oscillator input terminal.
XT
Oscillator output terminal.
H: X'tal oscillator signal, or external clock of 16.9344 MHz or 17.2872 MHz, is input to XT
L: X'tal oscillator signal, or external clock of 8.4672 MHz or 8.6436 MHz, is input to XT.
Clock output.
44.1
kHz sync clock input.
Serial data input.
Serial input bit clock input.
GND terminal (0 V).
H: System clock = 192 fs (fs: Sampling frequency).
L: System clock = 196 fs.
R CH deglitch signal (176.4 kHz).
L CH deglitch signal (176.4 kHz).
Serial data output.
Output control clock (352.8 kHz).
Output control clock (176.4 kHz).
Serial output bit clock (8.4672 MHz or 8.6436 MHz).
56
Power supply terminal (5 V).
Advertisement
Table of Contents
