Replaceable Parts; 6-1. Introduction; 6-3. Abbreviations; Replaceable Parts Lists - HP 5384A Operating And Service Manual

•
•
•
HP 5384A and HP 5385A
Replaceable Parts
SECTION VI
REPLACEABLE PARTS
6-1. INTRODUCTION
6-2. This section contains information for ordering
parts.
Table 6-1
lists abbreviations used in the parts list
and throughout the manual.
Tables
6-2 through
6-10
list all replaceable parts in reference designation
order. Table 6-11 contains the name and addresses
that correspond with the manufacturer's code
numbers.
Tables 6-12
and
6-13
list the hardware and
mechanical parts for the HP 5384A and HP 5385A,
respectively.
Figures 6-1
and 6-2 are exploded views
of the hardware and mechanical parts in the HP
5384A/HP 5385A.
6-3. ABBREVIATIONS
6-4. Table 6-1 lists abbreviations used in the parts
lists, schematics, and throughout the manual. In some
cases, two forms of the abbreviations are used, one all
in capital letters, and one partial or no capitals. This
occurs because the abbreviations in the parts are
always capitals. However, in the schematics and other
parts of the manual, other abbreviations are used with
both lower case and upper case letters.
6-5.
REPLACEABLE PARTS LISTS
6-6. Tables 6-2 through 6-12 are the lists of replace-
able parts and are organized as follows:
a. Electrical assemblies and their components in
alphanumerical order by reference designation.
b. Miscellaneous parts.
6-7. The information given for each part consists of
the following:
a. The reference designation.
b. The Hewlett-Packard part number.
c. Part number check digit (CD).
d. The total quantity (Qty) used in the instrument.
e. The description of the part.
f. A typical manufacturer of the part in a five-digit
code.
g. The manufacturer's number for the part .
6-8. The total quantity for each part is given only
once at the first appearance of the part number in the
list.
6-9. ORDERING INFORMATION
6-10. To order a part listed in the replaceable parts
table, quote the Hewlett-Packard part number (with
the check list) indicate the quantity required, and
address the order to the nearest Hewlett-Packard
office. The check digit ensures accurate and timely
processing of your order.
6-11. To order a part that is not listed in the replace-
able parts table, include the instrument model
number, HP 5384A or HP 5385A serial number, the
description and function of the part, and the number
of parts required. Address the order to the nearest
Hewlett-Packard office.
6-12. DIRECT MAIL ORDER SYSTEM
6-13. Within the USA, Hewlett-Packard can supply
parts through a direct mail order system. Advantages
of using the system are:
a. Direct ordering and shipment from the HP Parts
Center in Mountain View, California.
b. No maximum or minimum on any order (there
is a minimum order amount for parts ordered through
a local HP office with the orders require billing and
invoicing).
6-14. Mail order forms and specific ordering infor-
mation is available through your local HP office.
Address and phone numbers are located at the back
of this manual.
6-1