Page 1
Technical data DC input , Rod antenna Operating voltage 10-15VDC P10323 SEN-HD05R Output DIM 1-10V Dimming P10438 Stand-by power <30mA SEN-HB001VCR-1 Detection area 50%/100% Hold time 10s/1min/5min/10min 10Lux/30Lux/50Lux/Disable 1. Automatic On/o control with Daylight threshold Daylight sensor. Stand-by period 2. DC input...
Page 2
Wiring diagram Installation Method Yellow: 12V Grey :GND purple:DIM+ Settings Switch UP Switch DOWN Disable 1min 100% 50lux 30min 1min 5min 30lux 60min 10lux 10min Stand-by Detection area Hold-time Daylight threshold Stand-by period dimming level In this area, The period of Definition of the The period of light The definition...
Page 3
Application Attention 1. Please read the instructions carefully before using this product and keep it well No daylight function for all users to read at any time. The daylight threshold is set to "Disable". 2. The sensor should be installed by qualified electrician and ensure power is off after stand-by period Light on when detect movement, After people leave, Light off before the installation.