Download Print this page

naturaled SEN-HB001VCR-1 Manual

Dc input , rod antenna

Advertisement

Quick Links

DC input , Rod antenna
P10438
SEN-HB001VCR-1
1. Automatic On/o control with
Daylight sensor.
2. DC input
3. Remote control.
On/o
Detection
Hold
Daylight
Stand-by
control
area
time
threshold
Detection coverage
Typical installation height 2.5-4m
This gure indicates the maximum distance at the highest mounting height with 100% sensitivity.
Ceiling Mounted
4
3
2
1
1
2
1
Mounting
2
height
3
4
Well covered
P10323 SEN-HD05R
5
years
Stand-by
Remote control
period
dimming level
setting
3
4
Covered
Technical data
Operating voltage
10-15VDC
0
Output
DIM 1-10V Dimming
Stand-by power
<30mA
Detection area
50%/100%
Hold time
10s/1min/5min/10min
10Lux/30Lux/50Lux/Disable
Daylight threshold
Stand-by period
Stand-by dimming level
10%/20%/30%/50%
Microwave frequency
5.8GHz±75MHz
Microwave power
<0.3mW
Mounting height
Detection range
Max, ø10m (ceiling mounted)
Operating temperature
-20°C~+60°C
Detection angle
30°-150°
IP rating
IP20
Warranty
5 years
Mechanical structure (Unit: mm)
Antenna module
IR Receiver
Installation hole
Detection Range
Hold Time
85
Ø5.5
Ø2.5
11.3
Ø2.5
2.5
11.3
6.2
13.86
Daylight sensor
Stand-by Dimming level
Stand-by Period
Daylight threshold
12.8
22.3
1.8
7.8
11.7
01

Advertisement

loading

Summary of Contents for naturaled SEN-HB001VCR-1

  • Page 1 Technical data DC input , Rod antenna Operating voltage 10-15VDC P10323 SEN-HD05R Output DIM 1-10V Dimming P10438 Stand-by power <30mA SEN-HB001VCR-1 Detection area 50%/100% Hold time 10s/1min/5min/10min 10Lux/30Lux/50Lux/Disable 1. Automatic On/o control with Daylight threshold Daylight sensor. Stand-by period 2. DC input...
  • Page 2 Wiring diagram Installation Method Yellow: 12V Grey :GND purple:DIM+ Settings Switch UP Switch DOWN Disable 1min 100% 50lux 30min 1min 5min 30lux 60min 10lux 10min Stand-by Detection area Hold-time Daylight threshold Stand-by period dimming level In this area, The period of Definition of the The period of light The definition...
  • Page 3 Application Attention 1. Please read the instructions carefully before using this product and keep it well No daylight function for all users to read at any time. The daylight threshold is set to "Disable". 2. The sensor should be installed by qualified electrician and ensure power is off after stand-by period Light on when detect movement, After people leave, Light off before the installation.

This manual is also suitable for:

P10438