Ryobi RHT6060 Original Instructions Manual

Electric hedge trimmer

Advertisement

Quick Links

ORIGINAL INSTRUCTIONS
Electric Hedge
Trimmer
RHT6060

Advertisement

Table of Contents
loading

Summary of Contents for Ryobi RHT6060

  • Page 1 ORIGINAL INSTRUCTIONS Electric Hedge Trimmer RHT6060...
  • Page 2 Important! It is essential that you read the instructions in this manual before assembling, maintaining, and operating the product. Subject to technical modification.
  • Page 3: Intended Use

    Safety, performance, and dependability have been given cord suitable for outdoor use reduces the risk of electric top priority in the design of your electric hedge trimmer. shock ■ If operating a power tool in a damp location is INTENDED USE unavoidable, use a residual current device (RCD) protected supply.
  • Page 4: Additional Safety Warnings

    tool or these instructions to operate the power tool. ■ Exercise additional caution when using the product near Power tools are dangerous in the hands of untrained fencing, posts, buildings, or other immovable objects. users. ■ Beware of thrown objects. Keep all bystanders, ■...
  • Page 5: Overload Protection

    ● before cleaning or clearing a blockage MAINTENANCE ● before leaving the product unattended ● before checking, maintaining, or working on the WARNING product Use only original manufacturer’s replacement parts, ■ Do not force the hedge trimmer through heavy accessories, and attachments. Failure to do so can shrubbery.
  • Page 6: Risk Reduction

    with the blade protector when the product is not in use. Always hold the hedge trimmer with both hands when operating. ■ injury caused by vibration – Always use the right tool for the job. Use designated handles and restrict working time and exposure. ■...
  • Page 7 The following signal words and meanings are intended to explain the levels of risk associated with this product. DANGER Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
  • Page 8 WHAT’S IN THE BOX...
  • Page 9: Know Your Product

    KNOW YOUR PRODUCT 1. Rear handle 6. Guard 2. Rear trigger 7. Blade 3. Handle rotation trigger 8. HEDGESWEEP 4. Front handle 9. Blade sheath 5. Front trigger...
  • Page 10: Getting Started

    GETTING STARTED Always wear safety goggles or safety glasses with side Slide the HEDGESWEEP over the blade. Remove the shields when operating the product. Failure to do so could blade sheath from the blade. result in objects being thrown into your eyes resulting in possible serious injury.
  • Page 11 GETTING STARTED Pull and secure the cable in the cable retainer. Hang the cable onto the cable retainer.
  • Page 12 OVERVIEW Operating the hedge trimmer Rotating the rear handle p.11 p.13 Cleaning the hedge trimmer Storing the hedge trimmer p.14 p.15...
  • Page 13: Operation

    OPERATION OPERATING THE HEDGE TRIMMER CAUTION: Always use two hands to operate the hedge trimmer, which is fitted with two handles. WARNING: Keep hands away from the blades at all times. 1. Slide the HEDGESWEEP over the blade. Remove the blade sheath from the blade.
  • Page 14 OPERATION 2. Connect the plug to a power outlet. 3. Press the front trigger with one hand, and squeeze the rear trigger with the other hand. 4. Use the hedge trimmer for cutting in a slow, sweeping action from side to side.
  • Page 15: Rotating The Rear Handle

    OPERATION ROTATING THE REAR HANDLE 1. Pull the handle rotation trigger. Turn the handle to the right or to the left until it 90° 90° clicks. NOTE: The handle can be rotated 45˚ or 90˚ to the left or to the right. 2.
  • Page 16: Cleaning The Hedge Trimmer

    MAINTENANCE CLEANING THE HEDGE TRIMMER 1. Disconnect the plug from the power outlet. 2. Slide the HEDGESWEEP off the blade. 3. After each use, clean the body and handles of the product with a soft, dry cloth and a brush. Clean the debris from the blades with a stiff brush.
  • Page 17: Storing The Hedge Trimmer

    STORAGE STORING THE HEDGE TRIMMER NOTE: Clean all foreign materials from the product before storing. 1. Disconnect the plug from the power outlet. 2. Cover the blade with the blade sheath. Slide the HEDGESWEEP over the blade. 3. Store the product in a cool, dry, and well-ventilated place that is inaccessible to children and away from sources of ignition.
  • Page 18: Product Specifications

    PRODUCT SPECIFICATIONS VIBRATION LEVEL Electric hedge trimmer Model RHT6060 WARNING Rated power 600 W The declared vibration value has been measured with a standard test method and may be used to compare one Rated voltage 230 –240 V, 50 Hz tool with another.
  • Page 20 Imported by: Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia Techtronic Industries N.Z. Limited 2 Landing Drive, Mangere Auckland, 2022, New Zealand 099217003001-01...

Table of Contents