a
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector
in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Direct Wire—Connect
ground wire
Form
bare ground wire into a U-shaped
hook. Wrap
ground wire hook clockwise around ground connector
screw and under the washer. Securely tighten ground
connector.
Direct Wire—Connect
NOTE: Twist on UL Listed/CSA Approved wire connector.
Gently tug on wires to be sure both are secured.
Connect wires black to black and white to white, using
UL Listed/CSA Approved twist-on wire connectors (not
included).
Wiring configuration
Power.supply wire:
Terminal box wire:
white
>. white
black <«<———»
black
ground wire ««<——— »». ground connector
If needed, see website for animated
representation
of this step. Visit www.kitchenaid.com/electrical
under
FAQ tab.
4 | Direct Wire—Secure cable
in strain relief
Direct Wire—Reinstall
terminal box cover
Place wires inside terminal box. Insert tabs on left side
of cover. Make sure wires are tucked inside box. Close
cover ensuring wires are not pinched. Use 14" nut driver
and previously removed screw to secure cover.
21