Specifications - Sony BKM-220D Operating Instructions Manual

Troubleshooting
If the problem persists after you attempted to
correct the problem using the following,
consult qualified Sony personnel.
The equipment items are not
recognized correctly/the equipment
appears to be operating erratically
• Check that the cables are connected
correctly. (See "Multiple connections.")
• Check that the connected equipment items
are turned on.
• When DV signals are input to the
connector and its i LINK cable is also
connected to another connector, the bus-
reset occurs, the connected DV signals are
stopped and the picture is not displayed on
the monitor. Output the signals from the
equipment again.
Equipment used to confirm the
operation (as of January 1. 2004)
DCR-TRV70K, DCR-PC7, DCR-PC100,
DCR-PC7E, DCR-TRV9, DCR-TRV5,
DCR-SC100, DCR-VX700, DCR-
VX1000, DSR-25, DSR-DR1000, DSR-
DU1, DSR-70P, DSR-2000, DSR-30,
DSR-PD150

Specifications

General
Power requirements
+5 V (supplied from the main unit)
Power consumption
4W
Operating conditions
Temperature 0°C to 35°C (32°F to 95°F)
Optimum temperature
20°C to 30°C (68°F to 86°F)
Humidity 0% to 90% (no condensation)
Pressure 700 hPa to 1060 hPa
Storage and transport conditions
Temperature –10°C to 40°C (14°F to 104°F)
Humidity 0% to 90%
Pressure 700 hPa to 1060 hPa
Maximum external dimensions (w/h/d)
100 × 20 × 161 mm
(4 ×
13
/
16
Mass Approx. 230 g (0.5 lb)
× 6
3
/ inches)
8
Input/Output connectors
6-pin (IEEE1394) × 2
DV
Signal characteristics
Video signals
Sampling frequency
Y/R-Y/B-Y 13.5 MHz
Quantization 8 bits/sample
Audio signals
Channel number
4 ch
Sampling frequency
2 ch: 48 kHz
4 ch: 32 kHz
Quantization 2 ch: 16 bits
4 ch: 12 bits
Accessory supplied
Operating instructions(1)
Design and specifications are subject to change
without notice.
11
GB
Specifications