Advertisement
Quick Links
Advertisement
Related Manuals for NCR 7360-K051
Summary of Contents for NCR 7360-K051
- Page 1 Kit Instructions Security Door Electronic Lock 7360-K051 Issue A...
- Page 2 NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
- Page 3 Revision Record Issue Date Remarks Sep 2020 First Issue...
- Page 4 Security Door Electronic Lock (La Gard) The Security Door Electronic Lock limits the access to the currency devices. This publication provides procedures for installing an Electronic Lock (La Gard) on the Security Door of an NCR FastLane SelfServ™ Checkout (7360) unit. Kit Contents Part Number...
- Page 5 7360-K051 Security Door Electronic Combination Lock Installation Procedure To install the Electronic Lock (La Gard), do the following procedures: 1. Remove the existing Security Door Lock. Depending on the type of Lock, refer to either of the following procedures: •...
- Page 6 7360-K051 Security Door Electronic Combination Lock Removing Electronic Lock To remove the Electronic Lock, follow these steps: 1. Open the Electronic Lock. For more information, refer to Opening Electronic Lock page 14. 2. Remove the Lock Assembly by doing the following: a.
- Page 7 7360-K051 Security Door Electronic Combination Lock b. Disconnect the cable from the connector port of the Lock Assembly and then remove the excess cable secured on the bridge lance, as shown in the image below. 3. Rotate the Entry Device Assembly at approximately 30° counterclockwise to...
- Page 8 7360-K051 Security Door Electronic Combination Lock 4. Detach the Dial Plate from the Security Door by removing two (2) screws, as shown in the image below.
- Page 9 7360-K051 Security Door Electronic Combination Lock Removing Keylock To remove the Keylock, follow these steps: 1. Open the Keylock. For more information, refer to Opening Keylock on page 16. 2. Detach the Escutcheon Cover from the Security Door by removing two (2) mounting...
- Page 10 7360-K051 Security Door Electronic Combination Lock 3. Detach the Lock Assembly from the Security Door by removing three (3) bolts, as shown in the image below.
- Page 11 7360-K051 Security Door Electronic Combination Lock Installing Electronic Lock To install the Electronic Lock, follow these steps: 1. Remove the existing Electronic Lock, if necessary. Depending on the type of Lock, refer to either of the following procedures: • Removing Electronic Lock on page 3.
- Page 12 7360-K051 Security Door Electronic Combination Lock 3. Assemble the Entry Device Assembly by doing the following: a. Insert the Spindle into the Entry Device and ensure that it is fully seated in the slot. b. Route the Entry Device cable in the groove of the Spindle, as shown in the image...
- Page 13 7360-K051 Security Door Electronic Combination Lock c. Slide the Bearing Plate over the cable and spindle and then press onto the fasteners of the Entry Device. 4. Feed the Entry Device Assembly cable through the Spindle hole, as shown in the...
- Page 14 7360-K051 Security Door Electronic Combination Lock 5. Secure the Entry Device Assembly to the Dial Plate on Security Door by doing the following: a. Rotate the Entry Device approximately 30° counterclockwise to engage its bushings into the large openings of the Dial Plate, as shown in the image below.
- Page 15 7360-K051 Security Door Electronic Combination Lock 6. Install the Lock Assembly by doing the following: a. At the back of the Security Door, pull the cable gently to ensure that there is no excess cable in the Spindle hole. b. Connect the cable to the connector port of the Lock Assembly and then secure...
- Page 16 7360-K051 Security Door Electronic Combination Lock c. Align the Spindle hole of the Lock Assembly to the protruding Spindle and then secure the Lock Assembly on the door using three (3) bolts, as shown in the image below. To change the combination of the Electronic Combination Lock, refer to...
- Page 17 7360-K051 Security Door Electronic Combination Lock Opening Electronic Lock To open the Electronic Lock, follow these steps: 1. Access the Security Door by using a key to unlock and open the NCR FastLane SelfServ™ Checkout (7360) Cosmetic Door.
- Page 18 7360-K051 Security Door Electronic Combination Lock 2. On the Security Door, enter a valid combination in the Combination Lock. The Combination Lock LED flashes two times and beeps two times. Note: If the combination is invalid, the Combination Lock LED flashes three times and beeps three times.
- Page 19 7360-K051 Security Door Electronic Combination Lock Opening Keylock To open the Keylock, follow these steps: 1. Access the Security Door by using a key to unlock and open the NCR FastLane SelfServ™ Checkout (7360) Cosmetic Door.
- Page 20 7360-K051 Security Door Electronic Combination Lock 2. On the Security Door, insert the Setup Key or current Operating Key into the keyhole. Caution: Do not force the key into the lock to avoid causing permanent damage to the Lock or the Key. Do not apply inward or outward axial force to the Key once it is inserted to avoid causing the Lock from opening incorrectly.
- Page 21 7360-K051 Security Door Electronic Combination Lock Replacing Electronic Lock Battery If the Combination Lock LED flashes and beeps repeatedly when the door is open, the battery is low and needs to be replaced. It is recommended to replace the battery at least once per year.
- Page 22 7360-K051 Security Door Electronic Combination Lock Removing Electronic Lock Battery If the Combination Lock LED flashes and beeps repeatedly when the door is open, the battery is low and needs to be replaced. It is recommended to replace the battery at least once per year.
- Page 23 7360-K051 Security Door Electronic Combination Lock 2. Allow the battery and its attached leads to drop down and out of the battery compartment. If the battery does not drop, gently pull on the battery until it drops out.
- Page 24 7360-K051 Security Door Electronic Combination Lock 3. Unsnap the battery terminals from the battery clip.
- Page 25 7360-K051 Security Door Electronic Combination Lock Installing Electronic Lock Battery If the Combination Lock LED flashes and beeps repeatedly when the door is open, the battery is low and needs to be replaced. It is recommended to replace the battery at least once per year.
- Page 26 7360-K051 Security Door Electronic Combination Lock 3. Press and hold the zero (0) key for ten (10) seconds before installing the new battery. 4. Gently push the battery and leads completely into the battery compartment.
- Page 27 7360-K051 Security Door Electronic Combination Lock 5. Install the battery cover by placing one side of the cover in positon first and then gently pressing the other side into place.
- Page 28 7360-K051 Security Door Electronic Combination Lock Changing Number Combination of Electronic Lock To change the combination of the Electronic Combination Lock of the NCR FastLane SelfServ™ Checkout unit, follow these steps: Caution: Ensure that the Security Door is open before performing this procedure. For...