Setting Up And Connecting The Device; Drain Water Connection; Drinking Water Connection; Electrical Connection - Bosch SBV4HAX20N User Manual

NLSet up and connect
4.2 Setting up and connecting
the device
You can install your under-counter or
built-in appliance in the kitchen unit
between wooden and plastic walls. If
you subsequently set up the appliance
as a free-standing appliance, you must
secure the appliance against tipping
over, e.g. by screwing it to the wall or
installing it under a continuous
worktop that is firmly connected to the
adjacent cabinets.
Observe the safety instructions. →
1.
Page 4
Observe the instructions for the
2.

electrical connection.

Check the contents of the packaging
3.
and the condition of the device.
The required installation dimensions can be
4.
found in the installation manual.
Level the device using the
5.
adjustable feet.
Make sure you have a firm stand.
Install the drain water connection.
6.
→ Page 12
Install the drinking water
7.
connection. → Page 12
Connect the device to the
8.
power.

4.3 Drain water connection

Connect the appliance to a drain water
connection so that the contaminated
dishwashing water can be drained.
Install waste water connection
The required steps can be found in
1.
the supplied installation manual.
12
Connect the drain hose to the
2.
connection nipple of the siphon
using the supplied parts.
Make sure that the drain hose is not
3.
kinked, crushed or tangled.
Make sure that the flow of water is
4.
not prevented by a cap in the waste
water connection.

4.4 Drinking water connection

Connect the device to a drinking
water connection.
Install drinking water connection
Remark
¡If you replace the device,
you can use a new water supply
hose.
The required steps can be found in
1.
the supplied installation manual.
Connect the device to the drinking
2.
water connection using the
enclosed parts.
Observe the technical data.
Make sure that the drinking water
3.
connection is not kinked, crushed
or tangled.
4.5 Electrical connection
Connect the device electrically
Comments
¡Take the safety precautions
→
Page 4 into account.
¡Please note that it is
The security system only works
when the device is supplied with
power.
Connect the device plug of the
1.
connecting cable to the device.