Yamaha XT250 2024 Owner's Manual page 53

1
1. Engine oil filler bolt
2
1
1. Engine oil drain bolt
2. Gasket
TIP
Skip steps 4–6 if the oil filter element is
not being replaced.
4. Remove the oil filter element cover
Periodic maintenance and adjustment
by removing the bolts.
1. Oil filter element cover bolt
2. Oil filter element cover
5. Remove and replace the oil filter
element and O-rings.
TIP
Make sure that the O-rings are properly
seated.
7-14
1
1
2
1
1. O-ring
2. Oil filter element
6. Install the oil filter element cover by
installing the bolts, and then tight-
en to the specified torque.
Tightening torque:
Oil filter element cover bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
7. Install the engine oil drain bolt with
a new gasket, and then tighten the
bolt to the specified torque.
Tightening torque:
Engine oil drain bolt:
20 N·m (2.0 kgf·m, 15 lb·ft)
8. Pour the specified amount of the
recommended oil into the crank-
1
2
3
2
4
5
6
7
8
9
10
11
12