Download
Share
Print this page
Husqvarna LX 95 Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Garbage Disposal
  5. LX 95
  6. Operator's manual
Husqvarna LX 95 Operator's Manual

Husqvarna LX 95 Operator's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
LX 95
EN
Operator's manual
2-18

Advertisement

loading

Summary of Contents for Husqvarna LX 95

  • Page 1 LX 95 Operator's manual 2-18...

  • Page 2: Table Of Contents

    Contents Introduction..............2 Transportation, storage and disposal......14 Safety................4 Technical data.............. 15 Operation................ 9 EC Declaration of Conformity........18 Maintenance..............10 Introduction California Proposition 65 Product description The product is a walk-behind forward plate compactor WARNING! with a combustion engine. The product is used for compaction of thin to moderately thick layers of granular soils.
  • Page 3 Product overview 1. Throttle control 19. Oil tank cap and dipstick 2. Lifting point 20. Operator's manual 3. Safety frame and handle Symbols on the product 4. Vibration damping units, 3 at the handle 5. Type plate WARNING: This product can be dangerous 6.

  • Page 4: Safety

    Gasoline is very flamma- ble and explosive. Always stop the engine and let it Use protective boots. become cool before you refuel. Risk of injury. Be careful around the drive The exhaust fumes from belt. the engine contain carbon monoxide, an odorless, poisonous and very dan- gerous gas.
  • Page 5 General safety instructions • Make sure that only approved persons are in the work area. • Keep the work area clean and bright. • Make sure that you are in a safe and stable position WARNING: Read the warning instructions during operation.
  • Page 6 Exhaust fumes safety • Numbness, loss of feeling, tingling, pricking, pain, burning, throbbing, stiffness, clumsiness, loss of strength, changes in skin color or condition. WARNING: Read the warning instructions • Symptoms can increase in cold temperatures. Use that follow before you use the product. warm clothing and keep your hands warm and dry when you operate the product in cold environments.
  • Page 7 Do a check of the safety devices regularly. If the safety devices are defective, speak to your • Replace the 4 vibration damping units on the ground Husqvarna service agent. plate each year. • Replace the vibration damping units on the engine Engine ON/OFF switch plate and at the handle if it is necessary.
  • Page 8 Fuel safety • Make sure that the work area is safe. Wet and loose soil decreases safe operation of the product. Be very careful on slopes and rough surfaces. • Make sure that all persons in the work area are WARNING: Read the warning instructions that follow before you use the product.

  • Page 9: Operation

    • After maintenance, do a check of the vibration level • Let an approved service center do servicing on the in the product. If it is not correct, speak to an product regularly. approved service center. Operation Introduction 4. Set the engine ON/OFF switch to "ON". WARNING: Read and understand the safety chapter before you use the product.

  • Page 10: Maintenance

    To stop the product 1. Make sure that the throttle control is set to full throttle. 1. Move the throttle control to the idle speed position. 2. Carefully push the product forward. 2. Set the ON/OFF switch to "OFF". The engine stops. CAUTION: Do not push the product 3.
  • Page 11 Engine maintenance Before use, After the Weekly, Yearly, each each 10 h first 20 h each 100 h 300 h Do a check of the fuel level and the engine oil level. Clean the cooling fins of the engine. Examine the air filter. Clean the air filter if it is necessary. Clean the air filter.
  • Page 12 2. Remove the oil drain plug (A) and connect a hose 2. Remove the paper filter element and the foam filter (B). element (A). 3. Tilt the product and let the oil run out into the container. 3. Clean the air filter housing with a brush. 4.
  • Page 13 2. Remove the 4 bolts and remove the belt cover. 2. Remove the 4 bolts and remove the V-belt cover. 3. Examine the V-belt for damages and wear. Replace 3. Carefully remove the V-belt (A) from the clutch. the V-belt if it is damaged or worn out. 4.

  • Page 14: Transportation, Storage And Disposal

    4. Remove the 4 nuts and the 4 washers from the 6. Remove the product (D) from the ground plate. vibration damping units (B). 7. Remove the 4 vibration damping units (E). 5. Remove the 3 screws and the 3 washers (C). 8.

  • Page 15: Technical Data

    • When the product is no longer in use, send it to a Husqvarna dealer or discard it at a recycling location. a) Put 1 strap around the front of the bottom plate and attach the strap to the vehicle.
  • Page 16 Engine oil capacity *, l/qts 0.6/0.63 Fuel consumption, l/h or qts/h 1.2 or 1.3 Fuel * Unleaded gasoline, max. 10% ethanol Engine oil * SAE 10W-30, API Class SJ Grease, eccentric element Kluber Asonic HQ72-102 * = For further information and questions about this specific engine, refer to the engine manual or the web site of the engine manufacturer.
  • Page 17 Product dimensions Handle height, mm/in. 915/36.02 Max. height, mm/in. 1060/41.73 Length, mm/in. 478/18.82 Width, mm/in. 432/17.01 1652 - 001 - 03.05.2021...

  • Page 18: Ec Declaration Of Conformity

    EC Declaration of Conformity EC Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, Tel: +46 36 146500 declare on our sole responsibility that the product: Description Forward Plate Compaction Machine Brand Husqvarna Type/Model LX 95 Identification Serial numbers dating from 2021 and onwards...
  • Page 19 1652 - 001 - 03.05.2021...
  • Page 20 www.husqvarnacp.com Original instructions 1142690-26 2021-05-10...