Table of Contents
Advertisement
Procedures for Lowering the Cassette holder assembly
As the mechanism of this unit is integrated with the Housing
assembly, the holder must be lowered and the two screws un-
screwed when removing the Mechanism assembly.
(A)
(B)
Fig. 1
Turn the loading motor pulley in the direction as indicated by
Fig.2. As both (A) and (B) levers are lodged twice, push the
levers in the direction as indicated by Fig.3 to release them.
When pushing the levers, do it in the order of (A), (B), (B),
(A). When the holder has been lowered, turn the pulley until
the cassette holder is securely in place without allowing any
up/down movement.
Procedures for Lowering the Cassette holder assembly
(S1a)
(S1b)
Fig. D1
1-2
Fig. 2
Fig. 3
[1] Top cover
(S1a)
(S1b)
[1]
Bracket
(L2a)
(L2a)
[2]
Front panel
assembly
(L2a)
Fig. D2
Note:
When installing the Drum assembly, secure the screws (S3a to
S3c) in the order of a, b, c.
Inertia plate
(S3a)
(L3a)
(P3)
(L3b)
Roller arm
assy
Not used
[3]
Drum
asembly
Fig. D3
CN7001
"b"
<Note 2b>
"a"
<Note 2a>
WR2a [HR-VP790U/U(C)]
<Note 2c>
(S3c)
WR3a
<Note 2c>
CON1
(S3b)
WR3b
<Note 2c>
Cleaner assy
(L3c)
Not used
CN1
Advertisement
Table of Contents
