Table of Contents
Advertisement
SPECIAL APPLICATION
The versatility of the 900
+
receiver permits the utilization of 2 completely
separate stereo systems reproducing different program material.
Typical Example
System
#
1 - Connect left and right speakers to the
front
left and right speaker
terminals.
System
#
2 - Connect left and right speakers to the back left and right speaker
terminals.
Connect a pair of patch cords from the front tape out receptacles to the
front tape monitor receptacles.
Connect a stereo lope recorder output to the bock lope monitor receptacles.
Mode switch to CD-4/DISCRETE position.
With the TAPE MONITOR 1 switch depressed, System
#
1 will reproduce any
source selected by the function switch. System
#
2 will reproduce the output
of the tape recorder.
Loo
FRONT Roo
L
BACK R
SYSTEM I
TAPE TAPE
MON.
OUT
I
I
R
L
18
The VOLUME CONTROL should be used to set the overall level.
The SOUND FIELD BALANCE control should be used to alter the levels of the
separate systems.
The front and back TONE controls will function separately for each system,
The STEREO/ 4-CH rear panel switch must be in the 4-CH position.
SERVICE
If this instrument should not perform properly during the first
two
12) years
after date of purchase, contact the factory for instructions
.
The factory has many
authorized warranty service stations in the United States. To aid us in selecting
a service station convenient to you, it would be helpful if you would indicate
which major city is closest to your home. Please write our Customer Service
Deportment, Harman/Kardon, Incorporated,
55
Ames Court, Plainview, New York
11803. Be sure to include the model and serial numbers of the unit. A brief
description of your other components is often of help in answering your questions.
DO NOT return this instrument to Harman/Kardon without first receiving
c:,uthorization.
STEREO TAPE RECORDER
OR ANY OTHER HIGH
LEVEL STEREO SOURCE
SYSTEM 2
R
L
Advertisement
Table of Contents
