Rack Mounting; Typical Applications - Panasonic RAMSA WS-A240 Operating Instructions Manual

RACK MOUNTING BRACKETS
A. 1 Unit Mounting
Bracket fixing screws
(accessory) M4 x 8
1. Remove 4 rubber feet. d à
Fix the rack mounting brackets A and B {standard
accessory) to the Subwoofer processor with the
attached screws.
3. Mount the Subwoofer processor to the rack.
Bracket A: part No. A2SA1036A4
Bracket B: part No. A28A1037B3
Screws
e
(not provided)
Rubber feet 7
B. 2 Units Mounting (not provided)
Remove 8 rubber feet.
Fix two processors with bracket C and screws.
Fix the rack mounting brackets to the both sides of the
processor with the attached screws.
Mount the processor to the rack.
e SN
Bracket fixing screws
{accessory} M4 x 8
Mounting screws
M4 x 8 (not provided) Flush head machine
screws MA x B
Bracket A: part No. A2SA1036A4
Bracket C: part No. A2SA1038A4 Rubber feet
F. :
q^ VA
$ f Z
Caution: Don't use screws longer A. | Bracket A Nang
than 8 mm. LOE Z ~
Bracket C Rack mounting screws $
L not provided) inot provided)
TYPICAL APPLICATIONS
SYSTEM A
Illustrated are two WS-A10 Compact Speaker Systems in
a two channel configuration, powered by one WP-9055 am-
plifier. The single WS-A240 Subwoofer is powered by one
WP-9110 amplifier in the bridge (BTL) mode. The WS-
SP2A Subwoofer Processor should be adjusted (by quali-
fied service personnel only) for WS-A10/WS-A240 signal
processing.
A Dut
B Out
LE Out WP-9055
WS.SP2A
Subwoofer
Processor
Main Out L
WS-A240
Subwoofer
CS RE Sku
WP-9110 1BTL)
Main Out R