Advertisement
Command control via secure
communication protocol.
This device can be controlled via secure communication using
SSH authentication and encryption functions. Implement
"Creating Private and Public
Keys" procedure before.
Public
Click "NETWORK - COMMAND" menu on the web page.
(1)
Enable "COMMAND CONTROL" and "SECURE
PROTOCOL" and push APPLY button in " NETWORK -
COMMAND "
(2)
Connect the computer to the monitor.
1.
Start SSH client, specify the IP address and data port
number (Default setting: 10022) and connect the
computer to the monitor.
2.
Set the user name and the private key for the
registered public key, and enter the passphrase for
the private key.
3.
If the authentication is successful, the connection is
established.
(3)
Send commands to control the monitor.
1.
Use N-format or S-format commands to control the
monitor. For details on commands, refer to the
manual for each format.
TIPS
• If "AUTO LOGOUT" is on, the connection will be
disconnected after 15 minutes of no command
communication.
• Up to 3 connections can be used at the same time.
• Normal and secure connections cannot be used at the
same time.
Keys" and
"Creating Private and
3
Advertisement
