Table of Contents
Advertisement
,/_
WARNING
]
Small
parts can present
choking
hazard
if accidentally
swallowed.
Keep
small
parts away
from
young
children.
discard
unneeded
small
parts and other
objects,
including
packaging
materials
and plastic
bags/sheets
to prevent
them
from
being
played
with
by young
children,
creating
the potential
risk
of suffocation.
• If problems
occur during
use
If a problem
occurs
(such as no picture
or no sound),
or if
smoke
or an abnormal
odor
is detected
from
the Plasma
TV, unplug
the power
cord
immediately.
@ Continued
use of the TV under these
conditions
might cause
fire or permanent
damage
to the unit. Have the TV evaluated
at an Authorized
Service
Center.
Servicing
of the TV by any
unauthorized
personnel
is strongly
discouraged
due to its
high voltage
dangerous
nature.
If water
or foreign
objects
get inside
the Plasma
TV, if the
• Set up
Plasma
TV is dropped,
or if the cabinet
becomes
damaged,
Do not place
the Plasma
TV on sloped
or unstable
surfaces,
disconnect
the power
cord
plug
immediately.
@ The Plasma
TV may fall off or tip over.
@ A short
may occur, which
could cause fire. Contact
an
Do not place
any objects
on top of the Plasma
TV.
@ If water
spills
onto the Plasma
TV or foreign
objects
get
inside
it, a short-circuit
may occur which
could result in fire
or electric
shock.
If any foreign
objects
get inside the Plasma
TV, please
consult
an Authorized
Service
Center.
This Plasma
TV is for use only with the following
optional
accessories.
Use with any other type of optional
accessories
may
cause instability
which
could result
in the possibility
of injury.
(All of the following
accessories
are manufactured
by
Matsushita
Electric
Industrial
Co., Ltd.)
• Wall-hanging
bracket
(Vertical)
TY-WK42PV3U,
TY-WK42PV4W
• Wall-hanging
bracket
(Angled)
TY-WK42PR3U
TY-WK42PR4W
Always
be sure to ask a qualified
technician
to carry out set-up.
@ Two or more people
are required
to install and remove
the
television.
If two people
are not present,
the television
may
be dropped,
and personal
injury may result.
Transport
only in upright
position!
@ Transporting
the unit with its display
panel facing
upright
or
downward
may cause
damage
to the internal
circuitry.
• AC Power
Supply
Cord
The Plasma
TV is designed
to operate
on 120 V AC, 60 Hz.
Securely
insert
the power
cord plug as far as it will go.
@ If the plug is not fully inserted,
heat may be generated
which
could cause fire. If the plug is damaged
or the wall socket
plate is loose,
they should
not be used.
The included
power
cord
is for use with
this
unit
only.
Do not use any power
cord other than that provided
with this TV.
@ Doing
so may cause fire or electric
shocks.
Do not handle
the power
cord
plug
with
wet
hands.
@ Doing
so may cause electric
shocks.
Do not do anything
that might
damage the power cable. When
disconnecting
the power cable, hold the plug, not the cable.
@ Do not make any modifications
to, place heavy objects
on,
place near hot objects,
heat,
bend, twist or forcefully
pull the
power
cable. Doing
so may cause damage
to the power
cable
which can cause fire or electric
shock.
If damage
to the cable
is suspected,
have it repaired
at an Authorized
Service
Center.
Authorized
Service
Center
for any repairs
that need
to be
made.
C.UT,O. ]
Do not cover
the ventilation
holes.
@ Doing
so may cause
the Plasma
TV to overheat,
which
can
cause fire or damage
to the Plasma
TV.
Leave
a space
of 3 15/16"
(10 cm) or more
at the top,
left
and right,
and 2 3/4" (7 cm) or more
at the rear.
When
using
the pedestal,
keep
the space
between
the
bottom
of the TV and the floor
surface.
• When
using the Plasma
TV
Be sure to disconnect
all cables
before
moving
the Plasma
TV.
@ Moving
the TV with its cables
attached
might damage
the
cables
which,
in turn, can cause fire or electric
shock.
Disconnect
the power
plug from
the wall
outlet
as a safety
precaution
before
carrying
out any cleaning.
@ Electric
shocks
can result if this is not done.
Clean
the power
cable
regularly
to prevent
it from
becoming
dusty.
@ Built-up
dust on the power
cord plug can increase
humidity
which
might damage
the insulation
and cause fire. Unplug
the
cord from the wall outlet and clean it with a dry cloth.
This
Plasma
TV radiates
infrared
rays;
therefore,
it may
affect
other
infrared
communication
equipment.
Install
your
infrared
sensor
in a place away
from
direct
or
reflected
light
from
your
Plasma
TV.
Do not climb
up onto
the television
or use it as a step.
(Young
children
should
be made
particularly
aware
of this
caution.)
@ If the unit falls over or becomes
damaged
through
misuse,
injury may result.
The TV will
still
consume
some
power
as long
as the power
cord
is inserted
into the wall
outlet.
Notes
• Do not display
a still picture for a long time
This causes
the image
to remain
on the plasma
screen
("Image
retention").
This is not considered
a malfunction
and
is not covered
by the warranty.
Typical
still images
÷ Channel number and other Iogos
÷ Image displayed in 4:3 mode
÷ SD Card photo
÷ Video game
÷ Computer
image
•
Setup
To prevent "Image retention",
the screen saver is
automatically activated after
a few minutes if no signals
are sent or no operations are
performed. (p. 45)
@ Do not place the unit where
it's exposed
to sunlight
or other
bright
light (including
reflections).
@ Use of some types of fluorescent
lighting
may reduce
the remote
control's
transmission
range.
5
Advertisement
Table of Contents
