Roland RD-100 Owner's Manual page 8

Your RD-100 needs to be connected to a HiFi or keyboard amplifier in order to be audible. If your amplifier is mono, con-
nect the RD-100's L (Mono) output to the amplifier's input.
You can also use one or two pairs of headphones (Roland RH series), in which case you do not need an amplifier.
—~ PHONES
ome
1 2
+ eee 2 4
lg ie
Audio cables
: K\ )
—) = : Stereo
& headphones
HiFi set, KC series keyboard
amplifiers, etc.
(
! Stereo
headphones
1. Connect the INPUT jacks of the HiFi or keyboard amplifier to the RD-100's OUTPUT jacks using a pair of audio cables,
+ If the amplifier is fitted with RCA/phono jacks, consider using a pair of Roland PJ-1M audio cables (option).
2. Lower the volume on the RD-100 and the device to be connected.
3. Switch off the RD-100 and the device to be connected.
4. Connect the RD-100 to the amplifier, active speakers, etc.
5. Switch on the RD-100 and the external device.
6. Adjust the volume of the RD-100 and the external device.