DRAWING UP BOBBIN THREAD
1. Hold upper in read with left
hand, turn the hand wheel
slowly towards you until the
needle goes down and comes
up.
Then
stop the hand
wheel when the takeup lever
is at its highest position.
Lightly draw
up the upper
thread will be brought up in a
loop.
2. Pull
out both threads and
place
them
together under
presser foot to the rear of
machine.
CHANGING SEWING DIRECTIONS
1. Lower needle down into fabric and
raise presser
foot, pivot
the
fabric
around the needle to change
direction
as
desired.
2. Put down presser foot and
stan to sew.