Table of Contents
Advertisement
POWER SUPPLY
1 Make sure that the local voltage corresponds
to the voltage of the adapter (see
accessories).
2 Connect the mains adapter to the player's
4.5 V DC socket and to the wall outlet.
e Always disconnect the adapter when you are
not using it.
Batteries, type LR6, UM3 or AA (supplied or optional available)
e Open the battery compartment and insert the
rechargeable battery pack or 2 alkaline
batteries.
Typical playing times under normal conditions:
Alkaline batteries: 5.5 hours (ESA off)
4.5 hours (ESA on)
Remove the batteries if they are empty or the
CD player is not to be used for a long period
of time.
Note: In the right-hand corner of the display the battery condition will be indicated:
-Full batteries: no indication.
-Weak batteries: Œ
-symbol lights up. This symbol is not available when
rechargeable batteries are used.
-Empty batteries:
-symbol flashes and the message
££ appears. Replace
the batteries or connect the mains adapter.
Batteries contain chemical substances, therefore they should be disposed of
properly.
English
Advertisement
Table of Contents
