Sears 3352 Installation Manual

Installation Manual
30-INCH MULCH KIT — 3352
Model 3352 mulch kit is designed for use with Craftsman RER INSTALLING THE MULCH PLUG
1000 (Model 247.25000) 30-inch single-blade cutting decks only.
i. Install the mulch plug into the deck discharge opening by
CARTON CONTENTS positioning the shoulder bolts found on the base of the plug
into the holes on the deck. The stud on the deck surface will
fit through the hole on the upper portion of the mulch plug.
See Figure 1-2.
Before beginning installation, remove all parts from the carton to
make sure everything is present. Carton contents are listed below.
Part numbers are shown in parentheses.
' One 30" Deck Mulch Plug Assembly (631-04632) 2. Shift the mulch plug to the left to lock it in place, being sure
to engage the safety interlock switch.
REMOVING THE DISCHARGE CHUTE 3. Secure the mulch plug by tightening the wing knob on the
i. Remove the wing knob that secures the discharge chute in stud.
place.
2. Shift the discharge chute to the right to unlock it..
3. Remove the discharge chute from the deck discharge
opening by lifting it off the deck. See Figure 1-1.
{—
Figure 1-2
Figure 1-1
Sears Brands Management Corp., Hoffman Estates, IL 60179, U.S.A.
Visit our website: www.craftsman.com
Form No. 769-07716
(March 19, 2012)