PERFORMANCE INSURANCE PRODUCTION TOOLS • SHOW CONTROL • BACKUP SOLUTIONS Overview The OSCA-R5 is a next generation multiple command destination show control solution featuring momentary push buttons OSC Network input, POE or 5v DC powering and five independent (non-latching). Top Panel Buttons –...
Page 3
53500 In order to change settings navigate to the device's IP address (default: 192.168.1.253) on the network using a web browser or use its network name (default: OSCA-R5) and navigate to the “Network page” In order for changes to take effect press save and then restart (Please note if you have changed IP address or device name the page may not refresh, and you will need to open a new tab in your browser with the new user settings).
Page 4
For example, 1 will be sent as an integer, 1.00 as a float and one as a string. OSCA will also automatically read the entered OSC command (String) and determine what is the address and argument(s). For further information please see www.nemesis- research.com/opensoundcontrol A debounce time can be set per button in milliseconds.
Page 5
LED will flash red. Then press one of the following buttons to reset, or power cycle to exit factory reset mode. Button Action Switch DHCP on all other settings remain unchanged Reset network settings to defaults, destinations and button settings remain unchanged Reset all settings to factory defaults www.nemesis-research.com...
This declaration applies to - OSCA-R5 XX:XX:XX:XX:XX:XX manufactured by Nemesis Audio All products of type OSCA-R5 are included, provided they correspond to the original technical version and have not been subject to any later design or electromechanical modifications. We herewith declare that said products are in conformity with the provisions of the respective EC directives including all applicable amendments.