ASROCK AMD A620A Series Setup Manual page 68

PCIe/GFX Lane Configuration
Allows you to configure PCIe x16 Link Speed.
Configuration options: [Auto] [Gen1]-[Gen5]
M.2_1 Link Speed
Allows you to configure M.2_1 Link Speed.
Configuration options: [Auto] [Gen1]-[Gen5]
Chipset Link Speed
Allows you to configure Chipset Link Speed.
Configuration options: [Auto] [Gen1]-[Gen4]
UCSI Support
[Eneble] Select this item to enable UCSI (USB Type-C Connector System Software
Interface).
[Disable] Select this item to disable UCSI (USB Type-C Connector System Software
Interface).
External CLK Control
Allows you to configure External CLK Control.
Configuration options: [Auto] [eCLK0, GPP0-PCIe, GPP0-CPU] [eCLK1, GPP0-
PCIe, GPP1-CPU]
Note: Switch APU clocks source mapping will get stuck immediately (post code:
B0005A5A). Manully press cold reset button to bypass the stuck.
NVMe RAID mode
Allows you to enable or disable NVMe RAID mode. Please set the "PCIe/GFX Lanes
Configuration" item according to the RAID configuration.
Configuration options: [Disabled] [Enabled]
Adjust VddcrVddfull Mode
Allows you to configure VddcrVddfull mode.
Configuration options: [Auto] [Manual]
Adjust VddcrSocfull Mode
Allows you to configure VddcrSocfull mode.
Configuration options: [Auto] [Manual]
64