Panasonic SC-AK90 Operating Instructions Manual page 33

To switch the timer OFF
Press _) REC/_ PLAY andcheck"_) REC" goesout.
it_mlllt_$_lDLI]lKl_t
If you set the timer wrongly
Press_) I_EC/_) PLAY sothat "_) I_C" goesout.The_ _peat the
pzocedm-e from step1.
TO check settings
PressCLOC_/TIlv_R toselect"_ REC".
Two seconds l ater, thedisplaywill c-hanse m the fo]lowingo_en
0 Recording start time
(_ Recording ove_ time
_) Recording source
You can check settings even when the system is OFF.
To enjoy the desired source after the timer setting is"
completed.
Eve_ ff you change the music source, the _ _*ording will start
with the preset condition.
1. Fol]owi_ step 6 on page 32, turn ON the power and start playing
the desL,_Msomo_.
2. Press POWER to standby mode af_ you have mljoyed listening to
your desired source, and confirma tapeisinse_ indeck 2.
Tumlng the timer ON/OFF
As long as "(9 REC" isdisplayed, thez_-'ord t imerwillcome ON
everydayasset.
You can turnthe _
ONIOFF
by pressing
"(DREC/(_ PLAY"
whilethesystem isOFF.
Remember that whe_ "(DREC" isdisplayed, t hetimerisON. When
notdisplayed, thetimeris OFF.
Switch on the power.
While enjoying the desired source:
Press SLEEP to select the desired time• []
Every time you press the button;
The figure shows how to setthe system to standbymode aftex
30minutes.
The syste_m is t_rned off aft_ the set time has elapsed.
' To cancel the sleep timer
Press SLEEP to select "OFF".
To confirm the remaining time
(only while power is ON)
Pr'-_,sSLEEP.
To change the time remaining during operation
Press SLEEP to show the remaining time, and thea_ press SLEEP to
select the desired time.
The sleep timer turns OFF automatically themoment you attemptto
record a CD usingCD MANAGER function.
II
i
t
J
_FFJ
elfthePower isON, the_dme¢win notfunction. The system mttst be
inthestandbymode.
oil you switchthepower tothestandbymode whiletherecord tim_
is functJol_ng, the OFF time setting will not be activated.
elf AUX is selected as the source, when the Rmer comes ON, the
systemwill turnON, will engage "AUX" asthesource and will start
recording. If you want to reco_ _rom a connected compon_mt, set
the component's timer to the same time. (Refer to your equipment's
operating instructions.)
m