Table of Contents
Advertisement
Chapter 7
4
When the WPS LED is on, the client device has successfully connected to the router.
Method 2: Use the "Connect" button on the web management page
Use this method if your client device has a WPS button.
1
Visit
http://tplinkmodem.net
set for the GPON router.
2
Go to
Advanced
3
Click
Connect
on the page.
4
Press the WPS button of the client device directly.
5
The WPS LED of the router flashes for about 2 minutes during the WPS process.
6
When the WPS LED is on, the client device has successfully connected to the router.
Method 3: Enter the router's PIN on your client device
Use this method if your client device asks for the router's PIN.
1
Visit
http://tplinkmodem.net
set for the GPON router.
2
Go to
Advanced
3
Take a note of the current PIN of the router. You can also click the
to get a new PIN.
4
Enter the router's PIN on the client device. (The default PIN is also printed on the
label of the router.)
5
The WPS LED flashes for about 2 minutes during the WPS process.
or http://192.168.1.1, and log in with the password you
>
Wireless
>
WPS
page.
or http://192.168.1.1, and log in with the password you
>
Wireless
> WPS, and enable
Customize Your Network Settings
Router's
PIN.
Generate
button
79
Advertisement
Table of Contents
