Voice Recognition - Motorola Krave ZN4 CDMA Manual

touch Caller ID Alert, and choose Ring Only, Caller ID Then Ring,
or Caller ID Repeat.
Note: If your phone is set to Vibrate Only, Alarm Only, or
All Sounds Off, it does not speak when you receive a
call.

voice recognition

Your phone's voice recognition feature lets you make
calls and complete other actions by speaking
commands to your phone.
voice recognition tips
• When speaking the name of a Contacts entry, say
the name exactly as it is listed. For example, to
call the mobile number for an entry named Bill
Smith, say "Call Bill Smith mobile. " If you only
have one number for Bill Smith, say "Call Bill
Smith. "
30 personalize
• Speak numbers at a normal speed and volume,
and pronounce each digit distinctly. Avoid
pausing between digits.
• When you press the Voice key with your phone
open, your phone says voice command
prompts through the speakerphone. To change
this, see page 34.
voice commands
1 With your phone open, press the Voice key on the
right side of the phone (if your phone is closed,
hold the Voice key).
Your phone opens a list of voice commands and
says Please say a command.