Panasonic TH-65PB2E Service Manual page 25

6.5.1. About registration of electronic pen
[Information about registration of electronic pen]
Information about registration of electronic pen
You can register up to 4 electronic pens for each interactive plasma display.
Once an electronic pen has been registered, it cannot operate another interactive plasma display.
When registering or unregistering an electronic pen, be sure to turn off the power of any other interactive plasma
displays nearby.
Electronic pens may malfunction if multiple displays are used close together.
The registration methods of an electronic pen differ the first and the secnod and subsequent.
If you are registering an electronic pen for the first time, perform step
starting from step
Registration method of electronic pen
[Procedures]
Select "PAIRING" of "TOUCH-PEN SETTINGS" in the "SETUP" menu of the display, or
select
Pairing Tool starts and a confirmation screen is displayed. Select [OK].
Select [Pairing].
To stop the registration, select [Close].
While pressing both the Remote draw button and the Remote erase button , press the Power button .
The power LED blinks green and red alternately. The power indicator stays off.
You cannot register an electronic pen if 3 electronic pens have already been registered.
If you are using the Pairing Tool, clicking [Cancel] cancels the registration.
Bring the electronic pen to within 2 m from the electronic pen adapter (remove any obstacle between them).
Registration will be completed in a second. When registration is completed, the power LED lights green.
If a registration error has occurred, the power LED lights red for about one second and power off. Turn on the
electronic pen and perform registration again.
Upon completion of electronic pen registration, the pairing completion screen is displayed. Select [OK] or
[Return].
[To unregister the electronic pen]
Select "PAIRING" of "TOUCH-PEN SETTINGS" in the "SETUP" menu of the display, or select
[Start Pairing Tool] from the main menu of Panasonic WhiteBoard Software and select [Unpairing All].
Upon completion of Electronic pen deregistration, the unpairing all completion screen is displayed. Select [OK].
All registered electronic pens are unregistered when unregistration is performed.
[Check the number of registered electronic pens]
To check the number of current electronic pens registered, select
WhiteBoard Software's ( CD-ROM enclosure) main menu, and choose [Check Status].
It cannot check in built-in Easy WhiteBoard.
.
[Settings] [Start pairing tool] from the main menu of Panasonic WhiteBoard Software.
Remote erase button
Press power button
only. Otherwise, perform the procedure below
Press both of buttons
Remote draw button
[Settings]
25
TH-65PB2E
[Settings]
[Start Pairing Tool] in Panasonic