Advertisement
Operating instructions
Display
FRONT SPEAKERS
ON/OFF key/indicator
INTEGRATED AV SURROUND AMPLIFIER KA-¥6000
SOURCE
DIRECT key
Input selector keys
VOLUME CONTROL knob
VOLUME
FONTROL
nOAWA,
_WIK
_prantow
ViEO | REC GUY
ce
——av
aux,
B-VIDEQ
VIDEO
L AUDIO R
PHONES
jack
POWER key
@ Basic operation procedure
1. Press the POWER
key to ON.
® The indicator lights up and the unit enters operation
mode.
® Pressing the key again switches the power OFF.
@ The available
audio-component
inputs are TAPE2,
TAPE1, AUX, TUNER, PHONO, and CD.
@ The available video-component
inputs are VIDEOS,
VIDEO2, VIDEO1, DBS/TV, AV AUX and VDP.
SOURCE
DIRECT key is ON.
=
an
=e
"i
| 9 @OO
BALANCE
control for front speakers
TREBLE control for front speakers
BASS
control for front speakers
@ How to play an audio source
page 28.)
. Press the POWER
key to ON.
. Press the FRONT SPEAKERS key to ON.
. Press the desired input selector key.
. Play the selected input component.
. Adjust the volume with the VOLUME
CONTROL.
. Adjust the BALANCE,
TREBLE, and BASS controls as
desired.
NOOB
WN
@ How to listen through headphones
1. Insert the headphone plug into the PHONES
jack.
2. Press the FRONT SPEAKERS key to OFF.
3. When sub-woofers and/or Surround speakers are used,
switch OFF the power of the sub-woofers and/or press
the BYPASS key to activate the Bypass mode.
m@ SOURCE
DIRECT key
When the SOURCE
DIRECT key is pressed to ON (so that
the indicator
above
it lights) in the
Bypass
mode,
the
sound signal bypasses the tone control (BASS, TREBLE)
and the balance circuitry.
In this case,
the
tone
cannot
be adjusted,
but a flat
frequency response can be obtained.
Note:
The SOURCE
DIRECT
function is canceled
automatically when
one of the Surround modes is selected.
KA-V6000 (En)
23
Advertisement
