Table of Contents
Advertisement
Connecting the camera and smartphone without pairing
If you want to connect without pairing, you need to perform the Wi-Fi connection operation every time.
1.
On the camera, select MENU →
2.
Press the
(Delete) button on the camera to switch to the SSID and password screen.
3.
Open the Wi-Fi setting screen on your smartphone.
4.
On the Wi-Fi setting screen on your smartphone, select the SSID displayed on the camera and enter the password.
5.
Launch Creators' App on your smartphone and open the [Cameras] screen.
6.
Select the
(Setup) button in the upper right corner of the [Cameras] screen, and then select [Connect only via Wi-
Fi].
7.
Switch the screen back to Creators' App on your smartphone and select the product name of the camera (ILX-LR1).
The smartphone will connect to the camera.
Note
[Smartphone Connection] cannot be executed when [Airplane Mode] is set to [On].
Up to 2 devices can be connected to the camera at the same time using Bluetooth communication.
Radio wave interference may occur as Bluetooth communications and Wi-Fi (2.4 GHz) communications use the same frequency
band. If your Wi-Fi connection is unstable, it may be improved by turning off the Bluetooth function of the smartphone.
Related Topic
Functions available with a smartphone (Creators' App)
Using a smartphone as a remote commander
Select on Cam & Send (transferring to a smartphone)
Cnct. while Power OFF (smartphone)
Reading location information from a smartphone
(Network) → [
Cnct./PC Remote] → [Smartphone Connection].
5-055-988-11(1) Copyright 2023 Sony Corporation
353
TP1001218917
Advertisement
Table of Contents
