Table of Contents
Advertisement
Service Tool Mode
How to access
1.
Select [SRV-TOOL] in Service Mode.
2.
Press [OK] button on the remote control.
Display of Flash ROM maker code
Display of SOS History
Display of SOS History
SOS History (Number of LED blinking) indication.
From left side; Last SOS, before Last, three occurrence before, 2
This indication will be cleared by [Self/check indication and forced to factory shipment setting].
Power ON Time, On/Off
Note: To display TIME/COUNT menu, highlight position, then press MUTE for 3sec.
Time: Cumulative power on time, indicated hour: minute by decimal.
On/Off: Number of On/Off switching by decimal.
Note: This indication will not be cleared by either of the self-checks or any other command.
Exit
Disconnect the AC cord from wall outlet or switch off the power with [Power] button on the main unit.
SRV-TOOL
Flash ROOM: AD – F1
PTCT:00.00.00.00.00
Time 00051:30
On/Off 0000042
nd
occurrence after shipment, 1
15
POWER ON TIME/COUNT
Press [MUTE] button (3sec)
st
occurrence after shipment.
Advertisement
Table of Contents
