Cleaning And Disinfection - Tesla BP100 User Manual

OPERATION INSTRUCTIONS
1. Press the ON/OFF button (starts in „stimulation" mode automatically)
2. Press the mode button (switch between „massage" - „stimulation" -
„suction" modes)
3. Massage mode (9 levels)
4. Stimulation mode (9 levels)
5. Suction mode (9 levels)
Each click on the „13" and „14" buttons will display the current level.
6. Working time of the pump is 30 minutes. After 30 minutes, the pump
will shut down automatically.
7. The feeding bottle should not be overfilled. Please follow indication line.
8. 2 hours of charging will provide 90 minutes of working time.
PUMPING PROCEDURE INSTRUCTIONS
1. Wash hands thoroughly and ensure that your breast is clean. Relax and
sit comfortably.
2. Place the breast into the pump, make sure the nipple is in the center.
3. Press "11" button to turn on the pump. Press "12" button to cycle
between modes.
White - "massage" mode
Yellow - "stimulation" mode
Blue - "suction" mode
Press "13" and "14" buttons to increase/decrease power to match your
comfort.
Note: You don't need to use the maximum suction, choose the suction
that makes you feel comfortable.
4. After pumping, turn off the breast pump, and then carefully remove the
breast from the breast pump.
5. Unscrew the feeding bottle from the breast pump to prepare for nursing
or storage. To clean the used breast pump components, follow instruction
in chapter „Cleaning and disinfection".

CLEANING AND DISINFECTION

Warning! The motor unit should only be wiped down with a damp cloth.
Never wash the motor unit.
„Before first use, clean and disinfect all parts of the pump. Wash all the
parts every time before use. The breast pump must be disassembled
before every cleaning.
5