Table of Contents
Advertisement
SERVICE MODE
C. Setup Procedures
1. Displaying SERVICE MODE screen
Display Service Mode screen following the instructions "How to
enter Service Mode" above.
2. Displaying Internal Setup screen
Push NEXT button within three seconds after operating the
Service Mode display.
On the Internal Setup screen shown on the right, set up Market
and Region.
Market/Rejion setup table.
3. Setting Market code
3.1. While a highlighted indicator is displayed on the right side
of the Market denotation, push numeric buttons on the
remote controller. Be sure to input by double figures.
For example,in WM, input 0,0,
When you push wrong number , push CLEAR button.
(The indicator reset to "00")
3.2. Specify the code of the model in accordance with the
Market/Region Setup Table above.
3.3 Once the desired code is displayed, push p button to move
the highlighted indicator to the Region input area.
- 8 -
Advertisement
Table of Contents
