ViewSonic PJD6210 User Manual page 23

Gamma
Effect the represent of dark scenery. With greater gamma value, dark scenery will look brighter.
Computer Image (Computer Mode)
Frequency
Adjust the timing of the projector relative to the computer.
Tracking
Adjust the phase of the projector relative to the computer.
H Position (Horizontal Position)
Adjust the image left or right within the projection area.
V Position (Vertical Position)
Adjust the image up or down within the projection area.
Video Image (Video Mode)
Saturation
Adjust a video image from black and white to fully saturated color.
Sharpness
Sharpen or soften the image.
Tint
Shift colors toward red or green.
Setting (Computer / Video Mode)
Menu Position
Choose the menu location on the display screen.
Projection
Adjust the picture to match the orientation of the projector: upright or upside-down, in
front of or behind the screen. Invert or reverse the image accordingly.
Signal Type
Specify the source to the Computer In terminal that you wish to project.
RGB : For VGA signal
YCbCr : For component 480i,576i signals
YPbPr : For component 480p,576p,720p,1080i signals
Lamp Hours
Display the lamp's elapsed operating time (in hours).
Lamp Hours Reset
Reset the lamp Hour to 0 hours.
Power Saving
If no operation is performed for a specific period of time, projector will automatically
turn off.
ViewSonic
20
PJD6210/PJD6210-WH