Table of Contents
Advertisement
3.
Match the battery carefully until it fits in place.
4.
Insert the plug from the AC adapter into the DC IN terminal.
5.
Insert the appropriate end of the power cord into the AC adapter.
6.
Insert the plug on the power cord into a wall outlet.
The CHARGE indicator lights red when charging is started and turns off
when charging is completed.
We recommended that you full charge the battery all the time.
When the projector is off, the charger works as a fast charging mode. It takes
approximately 5 hours to complete charging.
When the projector is on, the charger works as a slow charging mode.It takes
approximately 7 hours to complete charging.
For battery removal
Slide the battery lock switches on the two sides
to remove the battery from the projector.
CHARGE (Red)
On
Off
ViewSonic
PJ106D
CONDITION
Charging battery
Battery full
6
5
4
9
Advertisement
Table of Contents
