AEG FSK93718P User Manual page 12

Hide thumbs Also See for FSK93718P:
Table of Contents

Advertisement

Available languages

Available languages

Settings
Language
Reset settings
WiFi
Network
Forget network
PNC number
Counter (cycle counter)
1)
For more details, refer to the information provided in this chapter.
2)
For more details, refer to "Wireless connection" chapter.
7.1 Setting mode
How to navigate in setting mode
You can navigate in setting mode using
MY TIME selection bar.
A
B
A. Previous button
B. OK button
C. Next button
Use Previous and Next to switch between
the basic settings and to change their value.
Use OK to enter the selected setting and to
confirm changing its value.
How to enter setting mode
You can enter setting mode before starting a
programme. You cannot enter setting mode
while the programme is running.
12
ENGLISH
Values
List of languages (default:
English)
YES
NO
ON
OFF (default)
Signal strength
IP
MAC
YES
NO
Number
Number
C
Description
Set the preferred language.
Reset the appliance to the factory settings. The setting
does not reset the wireless connection setup.The setting
does not reset the cycle counter.
Activate or deactivate the wireless connection.
Check the information about the network connection.
Reset the network credentials.
Check the PNC number of your appliance.
Check the number of completed dishwashing cycles. The
counter restarts after reaching 65535.
To enter setting mode, press and hold
simultaneously
seconds.
• The lights related to the Previous, OK
and Next are on.
• The display shows the first available
setting and its current value.
How to change a setting
Make sure the appliance is in setting mode.
1. Use Previous or Next to select the
desired setting.
The display shows the setting name and its
current value.
2. Press OK to enter the setting.
The display shows available values.
3. Press Previous or Next to change the
value.
4. Press OK to confirm the setting.
• The new setting is saved.
• The appliance returns to the basic
settings list.
5. Press and hold simultaneously
and
for about 3 seconds to exit
setting mode.
The appliance returns to the programme
selection.
2)
2)
1)
and
for about 3

Advertisement

Table of Contents
loading

Table of Contents