Table of Contents
Advertisement
Parts Definition
How to Change Lens Kit
Installation Environment and Protection Rating
• This product is designed for indoor use with protection rating of IP65(standard type) and IP54(buzzer type).
• If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating
indicated(IP65), it may cause malfunction or damage to the product.
• For further information, please visit our website(www.qlight.com).
Cover(ABS)
Lens(PC)
Housing(ABS)
Sound volume lever
Pipe(Al)
• Disassembling lens kits
Twist the upper lens kit in a
①
counter-wise direction so the
"I" mark from both kits align.
Disassemble by removing the
②
upper lens kit from the lower
one.
• Assembling lens kits
① Put the two lens kits together
by aligning the upper lens' "I"
mark and the lower lens' "I"
mark together.
② Lock the two kits by twisting the
upper lens kit in a counter-wise
direction so the upper lens' " ◁ "
mark aligns with the lower lens'
"I" mark.
※ Cautions
Contact
Point
12
Cover(ABS)
Housing(ABS)
Bracket(STS430)
Lens modules are connected through
cone-shaped contact point. In case
the contact point is damaged, it may
cause a contact failure.
Advertisement
Table of Contents
