Connecting The Cables - Asus VA24DQ User Manual

2.6

Connecting the cables

Connect the cables as the following instructions:
BE24EQK
• To connect the power cord: Connect one end of the power cord securely to
the monitor's AC input port, the other end to a power outlet.
• To connect the VGA/DisplayPort/HDMI cable:
a. Plug one end of the VGA/DisplayPort/HDMI cable to the monitor's VGA/
DisplayPort/HDMI jack.
b. Connect the other end of the VGA/DisplayPort/HDMI cable to your
computer's VGA/DisplayPort/HDMI jack.
c. Tighten the two screws to secure the VGA connector.
• To connect the audio cable: connect one end of the audio cable to the
monitor's Audio-in port, the other end to the computer's audio-out port.
• To use the earphone: connect the end with plug type to the monitor's
earphone jack when an HDMI/DisplayPort signal is fed.
• To use the USB 2.0 port: Take the supplied USB 2.0 cable, and plug
the smaller end (type B) of the USB upstream cable to the monitor's USB
upstream port, and the larger end (type A) to your computer's USB 2.0 port.
Make sure your computer is installed with the lastest Windows 7/Windows 8.1/
Windows 10 operating
monitor to work.
2-6
BE24EQSK
system. That will enable the built-in webcam on the
Chapter 2: Setup