Table of Contents
Advertisement
DA-01
TRACK TIME
INDEX;
Flashing
TRACK NO
Flashing
TRACK TIME
3
INDEX
Flashing
9
Flashing
MIN
To program *17 seconds'.
Flashing
MIN
SEC
O
o
g g I
g /7
SEC
TRACK TIME
To listen to a track from the programmed track starting
time
You can start playing a disc from any point desired in the
track by programming the track starting time.
Step 1: Press in the track number within which the desired
program content is contained, e.g. track '5', on the 0 to 9
buttons.
If the track is actually being listened to, proceed to Step
2 immediately.
Step 2: Press the TIME button within 5 seconds.
Step 3: Press in the track time you desire to start playing
from, on the 0 to 9 buttons, as shown to the right.
Step 4: Press the PLAY/START button within 5 seconds.
Note.
If you have programmed a track time longer than the actual
duration of track time (e.g. You assign '6:30' although the
track has the playing time of only '5:00'), the player will
then automatically return to the beginning of track '1' and
commence playing.
To play a track from an index flag
A certain number of tracks may have the latent index flag
from which you can directly start listening to the musical
content (e.g. drum solo, vocal, etc.). These index flags may
be advised by referring to the leaflet accompanying the disc
(e.g. 'Index ® drum solo').
Then program the desired
index number.
Example:
To program '6 minutes 30
seconds' in track '5'.
First, program the number
of the track in which
the desired index flag is
contained.
Note.
If the track is to end within approximately 15 seconds
after the programmed track time (e.g. You assign '6:30'
for the track that ends after 6 minutes and 40 seconds),
the player may automatically return to the beginning of
the track 'V and will commence playing.
n
fi
u I J
8
TRACK NO
Flashing
TRACK N
Flashing
TRACK TIME
^KU CERa
g. g^
5
Ml
rs
8
Step 1 : Press in the track number within which the desired
index number is contained, on the 0 to 9 buttons, e.g. track
'8'.
If the track is actually being listened to, you need not
program the track number. Proceed to Step 2 immediately.
Step 2: Press the INDEX button within 5 seconds after
Step 1. The INDEX indicator dot will illuminate.
Step 3: Press in the index number within 5 seconds after
Step 2, on the 0 to 9 buttons.
Step 4: Press the PLAY/START button within 5 seconds
after Step 3. In the example above, track '8' will be
searched and the music starts from index number '3' in
track '8'. At the same time, the TRACK TIME indicator
will display the track time indication.
Note.
If you have erroneously programmed a number of which
the actual index flag does not exist in the track, the player
will return to the first track of the disc and will resume
playing.
Advertisement
Table of Contents
