Optional Turbo Timer Mode - CrimeStopper CS-2016DPII-FM Informer II Operating Instructions Manual

OPTIONAL TURBO TIMER MODE:

IMPORTANT NOTE: This mode requires the use of an extra part called a momentary switch or button
that is not included with the kit. Check with your installer about adding this feature. The optional
Turbo Timer mode allows the your system to keep your vehicle running for 1 to 5 minutes [selectively]
after you remove the key, exit the vehicle, and lock the doors remotely [if you own a Turbo or Turbo
Diesel]. This is handy for turbo cool down without the need for expensive Turbo Timers.
1) Engine should be running with the key. Press and hold the brake pedal.
2) Press your "Turbo Timer" button 1 to 5 times for each minute of run time you desire. (1 press = 1 min.)
3) Release the brake pedal and your system will confirm by flashing the lights the same number of times the
button was pressed.
4) Turn Ignition switch OFF, remove key and exit the vehicle. Remote lock your doors for safety. The engine
should remain running for the selected number of minutes.
RUNNING
LIGHTS
FLASH 1-5X
OPTIONAL TURBO TIMER MODE
PRESS
AND HOLD
BRAKE
REMOVE KEY
13
PRESS TURBO
TIMER BUTTON
1-5 TIMES
EXIT VEH.
RELEASE
BRAKE
REMAIN
RUNNING
1-5 MIN.