Table of Contents
Advertisement
Operation
Selecting the input signal
If the selected input signal does not deliver an image, the monitor
shall change this automatically.
In the following cases an automatic change of the input signal is disabled:
•
When the "Daisy-Chain" function is activated.
•
When the All-in-One mode is enabled (see
Press the button
is not displaying an image and is in power-saving mode.
30
► Press the
► Press the
/
► Press the
button to confirm the selected monitor port or
the window without making any changes.
To call up the INPUT settings window if the monitor
button to open the INPUT setting window.
button to select the desired monitor port.
"Notes on All-in-One operation", Page
to close
48).
Fujitsu
Advertisement
Table of Contents
