MB110 Multimedia Color Monitor User’s Guide Guide de l’utilisateur Bedienungsanleitung (Latin American Spanish) (Italian) (Brazilian Portuguese) (Swedish) (Russian) (Japanese) (Traditional Chinese -Taiwan) with Sub-Woofer & USB (Simplified Chinese - China) 21" (20.0" Viewable Diagonal) (Korean)
U.S. Environmental Protection Agency (EPA). NERGY Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
If you lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local ViewSonic dealer. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME, THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.
To assure continued FCC compliance, the user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized changes or modifications to this monitor would void the user’s authority to operate this device.
Getting Started Congratulations on your purchase of a ViewSonic MB110 multimedia monitor. Important! Save the original box and all packing material for future shipping needs. NOTE: This product was designed for operation in the magnetic fields of the geographical hemisphere where purchased. Also, the word "Windows this user guide refers to the following Microsoft Windows '95, Windows '95 OSR2, and Windows '98.
Make sure the computer and the monitor are both turned off before connecting any cables. 3a PC users: Attach the video cable to the Video Input port on the monitor (see below), then connect the other end to your computer.
3) (Optional) To connect an external microphone and/or headphones, use the ports on the side of the monitor (see bottom of page 6). 6 Attach the power cord to the back of the monitor. Then plug the other end of the power cord into the power source (wall socket).
Operation The buttons on the Front Control Panel allow you to adjust both the screen image and the audio of your ViewSonic MB110 monitor (see below). Front Control Panel Speaker Front Control Panel To adjust the monitor, follow the numbered steps in sequence as shown below.
[M] curves vertical edges inward, [L] curves vertical edges outward. PIN-BALANCE curves the screen's vertical edges to the left or right. [M] curves vertical edges to left, [L] curves vertical edges to right. ViewSonic MB110 menu & save changes, press button [1]. NOTE: To access similar controls using the ViewSonic Host software, see pages 12-13.
Page 11
1 Press [2] to display the adjustment screen for the selected option. 2 Press [2] again to select an audio control. 3 Press [M] or [L] adjust the selected audio control. NOTE: ViewSonic recommends that you set 3D DYNAMIC SOUND "ON" for games and applications designed for surround sound. Operation ®...
Page 12
OnView Main Menu, Part 3 VIEWMATCH three preset color temperatures and you to adjust the red, green, and blue individually. NOTE: The factory setting for the monitor is 9300K, the color temperature most frequently used in offices with fluorescent lights. ViewSonic MB110 DEGA USS ®...
You can use your computer's mouse to adjust the USB OnView Host Software Controls as an alternative to using many of the traditional OnView controls (see pages 8-11). NOTE: Before you can use these USB software features, you must first install the ViewSonic ViewMeter (See page 10) Horizontal...
Page 14
MultiMedia Settings Sub-Menu Volume Control Bass Control Treble Control Microphone Volume Control Audio Control Sub-Menu ViewSonic MB110 Color Control Sub-Menu ® Currently Selected MultiMedia Control Currently Selected Control Save changes and Return to Main Menu Currently Selected User Color Control...
Macintosh computers require ViewSonic support. See back cover. ** Warning: Do not set the graphics card in your computer to exceed these maximum refresh rates. Doing so may result in permanent damage to the monitor. Other Information Type 21" (20.0" viewable diagonal) 90° deflection 0.26mm dot pitch, (0.22mm H, 0.14 mm V)
• Connect monitor to another computer. • Turn monitor OFF, wait one minute, then turn ON again. Do this only once. • If you have an older graphics card, contact ViewSonic for a non-DDC adapter.
ViewSonic does not recommend the use of any ammonia or alcohol-based cleaners on the monitor screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the monitor. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole option repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Page 19
NOTES Other Information ViewSonic MB110...
V804201101 For ViewSonic ® Customer Support: U.S. and Canada only 1-800-688-6688 From outside U.S. and Canada 909-869-7976 From Europe + 44 (1293) 643-900 From Asian/Pacific Rim countries 886 (2) 248-4072 Technical Support Questions vstech@viewsonic.com Product or Dealer Questions prodinfo@viewsonic.com World Wide Web: http://www.viewsonic.com...