ViewSonic G90M User Manual page 9

E
N
G
L
I
S
H
8
Using the Monitor
To exit the Main Menu & save changes, press button [1].
TRAPEZOID makes vertical edges of screen image parallel.
[M]narrows top and widens bottom, [L] widens top and narrows
bottom.
PARALLELOGRAM slants vertical edges of screen image to left
or right. slants vertical edges to left,
[M]
right.
TILT rotates entire screen image. [
L
clockwise. [ ] rotates screen image clockwise.
CORNER Straightens the four corners of the screen image.
Press [M] or [L] to adjust.
DEGAUSS There are two ways to degauss the monitor;
automatically by turning the monitor on, or manually by
selecting the Degauss control from the OnView
Important: Do not degauss repeatedly. Doing so can be
harmful to the monitor. Wait at least 20 minutes (before
selecting this control again.
®
VIEWMATCH COLOR provides four color adjustment
options: three preset color temperatures and
which allows you to adjust red and blue (green is fixed).
Press [M] or [L] to select one of the three color temperatures
shown below, then press [2] to activate it. Selecting and activating
USER COLOR displays the screen shown below.
NOTE: The factory setting for the monitor is 9300K, the color
temperature most frequently used in rooms with fluorescent lights.
USER COLOR
slants vertical edges to
[L]
M
] rotates screen image counter-
® Main Menu.
USER COLOR
ViewSonic G90m/G90mb
From this
screen,
press button
[2] to select
Red or Blue,
then press
[M] or [L] to
adjust.