Osd Lock Settings - ViewSonic G90f User Manual

OSD Lock Settings

You have the option of using the On Screen Display (OSD) locking feature, OSD LOCK, to
prevent unwanted changes to the current image settings.
• OSD Lock: Press and hold the [1] button on the face of the monitor for 10 seconds. The
message "OSD LOCK" will then display briefly, indicating that the OSD image settings
are now locked.
• OSD Unlock: Press and hold the [1] button again for 10 seconds. The message "OSD
UNLOCK" will then display briefly, indicating that the OSD image settings are now
unlocked.
Do the following to adjust the display settings:
1. To display the Main Menu, press button [1].
M A I N M E N U
CONTRAST / BRIGHTNESS
ZOOM
H. POSITION / SIZE
V. POSITION / SIZE
PINCUSHION / PIN BALANCE
TRAPEZOID / PARALLEL
TILT
E X I T :
1
2.
To select a setting to be adjusted, press the arrow buttons on the front control panel of
your monitor and scroll through the choices. When the desired control is highlighted,
press button [2].
Note: Some controls on the Main Menu are listed in pairs, such as Contrast/Brightness.
Display control screen (sample shown in step 3 below). Press button [2] to toggle to the
next control in the pair.
3.
To adjust the setting, such as CONTRAST in the sample below, press the arrow buttons.
CONTRAST
EXIT : 1
4.
To save the adjustment and exit the menu press button [1] twice.
ViewSonic
G90f/G90fB
1
( )
S E L E C T :
BRIGHTNESS : 2
2
8