OPERATION
This section shows how to adjust your monitor for your personal preference.
Front Control Panel
With your monitor turned on, follow the numbered steps in sequence as shown
below.
Press the Power On/Off* button to turn the monitor on.
Power light:
Green
= on
Yellow
= power saving mode
Press the SELECT button repeatedly
until the LED below the control you
want to adjust is lit.
Press the [–] or the [+] button to make
adjustments.
To make other adjustments, repeat
steps 2 & 3. Adjustments are saved
automatically.
* The monitor automatically degausses each time you turn it on. Degaussing removes
magnetic field buildup that can affect color purity and convergence. Do not turn the
monitor off, then immediately on again repeatedly. Wait 20 minutes before turning
the monitor on again to prevent possible damage.
ViewSonic E651
ViewSonic
RECALL
E
N
G
L
I
S
H
7