Advertisement
To operate the receiver
Basic operations
Facing toward the receiver
To turn the power
ON/OFF
To select an input
source
To turn on the Dolby Pro
Logic and select the
desired mode
To turn on the SFC
function and select the
desired mode
To output a test signal
To adjust the output
level of the center
speaker
To adjust the output
level of the surround
Speakers
To turn the Dolby Pro
Logic/SFC OFF and ON
To display simple receiver
information and procedures
for remedying trouble
To mute the sound level
To adjust the volume
level
POWER
Once the power has been set to
CA
=o
ON, it can be turned ON and OFF
[Note]
simply by pressing POWER.
After turning the power of the TV, VCR or laser disc player ON
or OFF, always press TUNER before pressing POWER when
turning the power of the receiver ON and OFF.
TAPE
TVWOVO
VCR
VDP
TUNER
CD
MONITOR
© PHONO can not be selected with this remote control.
o Selecting TAPE MONITOR
turns ON the tape monitor
function. Pressing it again or another input select button turns
the function OFF.
Changes as follows each time the button is
pressed.
SURROUND = 3 STEREO
OO PRO LOGIC
Changes as follows each time the button is pressed.
HALL————-
CLUB ————-LIVE
t- SIMULATED -— THEATER —
When the SURROUND or 3 STEREO mode is ON
TEST
i
C)
Press once more.to stop.a test signal.
When the SURROUND, 3 STEREO or THEATER (SFC) mode
is ON
[Noted
When the SURROUND
mode is ON and
the center mode is on PHANTOM,
you
cannot select the center channel.
— CENTER +
When the SURROUND or SFC mode is ON
— SURROUND +
ee)
The message "MUTING ON NOW" runs
repeatedly from right to left across the display as
long as the muting function is on.
Press once more to return to the original volume.
MUTING
Advertisement
