Advertisement
RQ-S75
Ref.No.
:
Ref.No.
Removal of the operation button,
Removal of the switch P.C.B.
9
plate and frame
Procedure
Procedure
1+6-8
1+6-8-9
Operation button
Operation button
1. Lift the operation button in the direction of arrow @ by the
sharp tipped screwdriver(-), and then remove the operation
button from the ribs.
e Remove the 5 screws(@~ @).
Removal of the cassette lid(A) ass'y,
cassette lid(B) ass'y, link unit(L),(R)
and plates
Ref.No.
10
Procedure
1—6—10
Cassette lid(B)
ass'y
e Remove the 4 screws( @ ~ @) to remove the parts shown
in above.
Removal of the jack holder and
switch knobs
Procedure
1-11
P.C.B.
Jack holder
Switch knobs
Mi Removal of the jack holder
® Remove the jack holder in the direction of arrow@ and @.
Wi Removal of the switch knob
® Press the claws in the direction of arrow and remove the
switch knob.
e Ensure the boss of switch mates the mechanism lever.
e Insert the battery shaft into the rechargeable battey
terminal(+), and then install the main P.C.B. on the
mechanism block.
Advertisement
