EVGA SuperNOVA 650 G5 User Manual page 5

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
3. Use the screws provided with your case to install the power supply
into your computer.
NOTE:
It is recommended to install the power
supply with the fan facing down. However, if your case places the
power supply at the bottom of the case and there are no ventilation
holes available, it may be best to install the power supply with the
fan facing up for greater efficiency and reliability.
4. Connect the 24-Pin ATX cable to the PSU and the motherboard.
5. Connect the 4+4-Pin EPS12V cable to the motherboard.
(Optional)
– If you plan on
extreme overclocking
supports additional 8-Pin or 4-Pin CPU power connectors,connect the
second 4+4-Pin EPS12V cable. This is
only
needed for heavy overclocking
or for Dual CPU motherboards.
6. Connect the 6/6+2-Pin PCI-E cables to your graphics card(s).
NOTE:
Do not attempt to plug an 8-Pin PCI-E cable into a 6-Pin
connector without first detaching the two extra pins.
7. Connect SATA power cables to all data drives or optical drives
(hard drives, solid state drives, optical drives).
8. Connect the peripheral "Molex" 4-Pin connectors for fans, pumps,
legacy components and other devices/adapters.
9. Connect the AC power cord to your power supply and to the wall.
Check all connections to assure a solid connection and turn the
power switch on the power supply to the ON position.
English
650W / 750W / 850W / 1000W GOLD
Power Supply User Manual
and your motherboard
4
Q&A
more than four screw holes
Q: I see there are
on the back of the power supply, but the packaging only offers (4)
screws, are some missing?
A:
Nothing is
missing; you will only need to attach the EVGA power supply to the case with four screws. The
power supply offers more than (4) holes to
provide optimal compatibility
Q: My EVGA Power Supply includes (2)
EPS cables
A: Motherboards
only require (1) 4+4 or 8-Pin EPS
connection on the motherboard may be found for
motherboard supports dual 4+4-Pin EPS connections, please refer to your
for details on the proper function and power of the EPS connections.
ECO Thermal Control
System?
Q. What is the
A. The ECO Thermal Control System, when enabled, allows the fan on your EVGA power supply to shut off during
low to moderate operation loads. The EVGA power supply's fan will
on the loading the power supply reaches. The fan will also increase in RPM when needed, based on the load operation
being requested from the components connected. This prevents unnecessary rotation,
levels and will
increase the life span
of the fan due to the fan not spinning when not required.
Please Note: If the ECO Thermal Control is disabled the fan will always spin, even at low loads. The fan will also
increase in RPM as needed automatically, based on the power draw from connected components.
Q. What if I want to use
power adapters
for my graphics card(s)/motherboard/peripherals?
A. EVGA always recommends the use of direct power connections from the power supply to power all components.
which end of the cable
Q. Does it matter
I plug into the power supply?
A: Yes, the connections going to the power supply will not have "break downs" like the EPS (CPU) has 4+4 on one
side and full 8-Pin on the other.
Check each cable
and connect only the same
''matching"
cable directly to the power supply as referenced on each connector.
Q. If I have an issue or a question, can I get support?
A. ALL EVGA products are backed by top tier warranties as well as technical support. Support can be reached
for your power supply at:
- USA:
+1-888-881-3842
option 1, option 3. or contact us via email at
- Europe:
+49 89 189 049 11
or by email via
eu.evga.com/support
650W / 750W / 850W / 1000W GOLD
Power Supply User Manual l
for today's varied case designs.
for my motherboard, do I need to connect up both?
connection. On some models, an additional 4+4-Pin or 8-Pin
dual CPU
configurations or for
extreme
overclocking. If your
motherboard manufacturer's manual
automatically turn back on
when needed, based
reduces ambient noise
as it is labeled appropriately to match the power supply side,
support@evga.com
.
.
5
English

Advertisement

Table of Contents
loading

Table of Contents