Cleaning And Maintenance - Braun MGK3335 Manual

Beard Trimming / Hair Clipping
Sliding combs (1a, 1b): Place one of the combs over the trimmer head (2a).
Press the release button (1c) and slide the comb to your desired length.
Fixed combs (1d, 1e, 1f, 1g): Click one of the combs onto the trimmer
head (2a).
• Trim against hair growth by guiding the flat comb part over the skin.
• Do not force the appliance through the hair faster than it can be cut.
• Avoid clogging the comb with hair. Remove and clean it from time to
time.
Precision and Contour Trimming
Use the trimmer head (2a) without comb attachment or the detailed
trimmer head (2c) for shaping sideburns, moustaches and partial short
beards.
Ear/Nose Trimming
• Remove any head and click the ear & nose trimmer head (2b) onto the
handle of the appliance.
• Carefully guide the appliance to the hair to be trimmed so that they reach
into the cutting cage. Avoid introducing the trimmer more than 5 mm
(1/4˝) into nose or ear.
Body grooming
Remove any head and click one of the trimmer heads (2a, 2d) onto the
handle.
Use the trimmer head (2a) only with the sensitive comb attached for body
grooming.
For delicate areas use the body trimmer head only with the sensitive comb
attached.

Cleaning and maintenance

• Switch off the appliance.
• Take off any head and attachment.
• Use the brush to clean the heads, combs and the appliance.
• The handle, the heads and combs can be cleaned under running water.
Rinse until all residues have been removed. Let all parts dry completely
before reassembling them.
• To keep the trimmer working properly, oil it with light machine oil (not
included) regularly.
13