Samsung Z Fold Series User Manual page 216

You can configure connections to various types of Wi-Fi networks and hotspots, manage saved networks,
and look up your device's network addresses.
Note: Certain options may vary by carrier.
Swipe down from the top of the screen to open the Quick settings panel, and then tap the Settings
1.
icon. From there, tap Connections.
Tap Wi-Fi, and then tap the switch to turn on Wi-Fi.
2.
Tap More options (the three vertical dots), and then tap Advanced. Use the switches to enable or
3.
disable the following options:
Switch to mobile data: When enabled, your device will switch to mobile data whenever the
•
Wi-Fi connection is unstable. When the Wi-Fi signal is strong, it will switch back to Wi-Fi.
Turn on Wi-Fi automatically: Turn on Wi-Fi in frequently used locations.
•
Detect suspicious networks: Get notified when suspicious activity is detected on the current
•
Wi-Fi network.
Show network quality info: Display network information (such as speed and stability) in the
•
list of available Wi-Fi networks.
Wi-Fi power saving mode: Enable Wi-Fi traffic analysis to reduce battery usage.
•
Network notification or Wi-Fi notifications: Receive notifications when open networks are
•
detected.
Show Wi-Fi pop-up: Alert me that Wi-Fi is available when opening apps.
•
Manage networks: View saved Wi-Fi networks and configure whether to auto reconnect to or
•
forget individual networks.
Wi-Fi control history: View apps that have recently turned your Wi-Fi on or off.
•
Hotspot 2.0: Connect automatically to Wi-Fi networks that support Hotspot 2.0.
•
Install network certificates: Install authentication certificates.
•
Wi-Fi Direct
Wi-Fi Direct uses Wi-Fi to share data between devices. You can disconnect your device from a Wi-Fi
Direct device if needed.
Swipe down from the top of the screen to open the Quick settings panel, and then tap the
1.
Settings icon. Tap Connections.
Tap Wi-Fi, and then tap the switch to turn on Wi-Fi.
2.
Tap More options (the three vertical dots), and then tap Wi-Fi Direct.
3.
Select a device, and then follow the prompts to connect.
4.
To disconnect from a Wi-Fi Direct device, navigate back to Wi-Fi Direct and then select the
5.
Page 210 of 349