iHome PetMedics 2P1S0005 User Manual

Connect the included AC wall power supply cable into the sound
machine's USB port and the other end to an available wall plug.
Power Button
Press to power machine ON and OFF.
2. Mode Button
When using the sound soother for the first time its default
setting is auto noise detection mode.
This means that when the machine detects noise 70dB or louder it will
automatically play one of the three soothing sounds for 1-Hour and
stop until a loud noise is detected again.
To put the machine into continuous play mode, press the M button and
listen for the long ascending tone.
This means soothing sound will play on a continuous loop until music
is paused or unit is powered off.
To put the machine back into auto noise detection mode press the M
button again and listen for the shorter ascending tone.
IMPORTANT: In this mode music will only play when a loud
noise is detected.
3. Play and Pause Button
The machine includes 3 built-in soothing sounds.
Press the play button once and the machine will play one of three
built-in soothing sounds.
Press this button again to pause the soothing sound.
4. Track Forward and Volume Increase Button
Press the button once to play the next soothing sound.
Press and hold this button to increase the volume.
5. Back Track and Volume decrease Button
Press this button once to go back to the previous track.
Press and hold this button to lower the volume.