Activate Modbus Tcp (X2) - Siemens SIMATIC FDE Gateway V1.1 Equipment Manual

6.4.4

Activate Modbus TCP (X2)

Modbus TCP basic settings
Enable Modbus TCP connectivity and set the parameters in the Modbus TCP (X2) tab. The
parameters are read out periodically.
Adding and activating parameters
To be able to save the configuration, at least one parameter must be "active" when the
interface is active.
Click "Add parameter". A parameter with name, address, function code and arguments can
then be inserted.
Enter the name and address of the parameter. Select the function code from the drop-down
menu:
SIMATIC FDE Gateway V1.1
Equipment Manual, 12/2023, A5E52683268-AE
Software and commissioning
6.4 Connectivity settings
53